RAKO WIRED VS WIRELESS SYSTEMS

Introduction

Rako is one the leading lighting control systems which performance admirably against the competition Lutron and Control 4 but does benefit by being of lower cost and it is easier to install. This makes it an ideal choice for high end residential and commercial properties.
One of the key benefits of Rako is the wireless solution which makes it a first choice for retrofits to existing properties where the lighting wiring is in place but there is no automation.
The key element of lighting control is to be able to select lighting scenes for a space which are set at the push of a button which will dim all the different lighting circuits to a prescribed level in the room. Rako allows you to have between 2 and 7 lighting scenes dependent on the selection of the control panel. For example a RCM-100 will allow 7 scenes to be programmed and a RCM-070 4 scenes.

Typically the scenes can light different areas of the space and allow for relaxation or for working by setting the light levels to the appropriate setting.

The Wireless Dimmers.

The RMT500 wireless dimmer is a trailing edge dimmer unit which has compact proportions and accordingly can be slipped up into the ceiling void through down-lighter holes. This means the converting a conventionally wired property to lighting control is straightforward and the existing wiring can normally be used. As the control panels are wireless these can then be positioned in place of the existing light switches or alternatively placed elsewhere in the room as no switch wiring is needed. The RMT500 is a very versatile dimmer which works very well on good quality LEDs anb depending on the back load of the LEDs can operate up to 500 watts of load. For larger loads the RMT1200 is a preferred choice as this can handle loads up to 1200w. There are leading edge dimmers available as well which are often better for incandescent or dimmable fluorescent loads. More details on the dimmer please take a look here RMT500.

Benefits if the Wireless System

• Good for retrofits and no switch wires needed
• Lower cost of control panels
• Extra control panels can be easily introduced at a late stage as no wiring needed

Wired Systems

For a wired system the RAK4 dimmers would normally be used, typically the RAK-4T which is a 4 channel trailing edge dimmer. These are normally located in a control room and all the lighting circuits would be run back to this room. The RAK-4T will take 4 channels but these can be linked together with a RAK-LINK to allow up to 8 RAK-4T dimmers to be connected together.

The other element of the wired system is the control panels. With the wired system then the control panels typically the WCM-070 would be daisy chained together with CAT5e cabling. If it is more convenient then a RAK-STAR can be used which means the control panels can be star wired from the control room.
However it is still possible to utilise the wireless control panels with the RAK system. This is done by introducing a RX-Link which allows wireless devices for instance control panels, to be connected into the Rako RAK dimmers.

Benefits of Wired System

• No batteries needed for control panels
• Control panels have back lit buttons for ease of viewing in the dark
• Programming easier where it is desired to control lighting is different rooms from certain control panels
• No limitation on RF signal strength and no distance limitations

Impact and Importance of installation of LED lighting

Wondering why people always look to improve the lighting conditions of their homes, offices or any other commercial places? The reason is light has the ability keep us optimistic. It helps to inspire customers, illuminate surrounding as well as improve the overall productivity of people.

LED create an exotic and pleasing ambiance

People often choose LED lights in order to create an exotic and pleasing ambiance. They not only choose LED lights to decorate their home, but also to give a personal touch so that they can rest and relax in a convenient manner. Better lighting conditions also helps to accentuate architectural features of a space, and creates visual interest in different functional areas, such as kitchens and bathrooms.

Focused and recessed LED lights

People also go with focused and recessed LED lights because they are highly efficient when it comes to illuminate a passage and make it lot more safer to pass through. They also implement them in hallways and staircases for brighter appeal.

LED suppliers provide energy-efficient and best-in-class quality LED lights

LED suppliers provide energy-efficient and best-in-class quality LED lights at the most competitive prices. They provide a vast arrays of lighting sources for homes and offices. If you want, they can provide you with the smart lighting options for better ambiance, energy saving and smart lighting.

In addition to that, they provide LEDs in a wide variety of shape, size, colour temperatures, allowing people to select their choice of lighting. They also suggest the most suitable lightings according to your specifications, for example, directional light bulbs for reading, etc. This shows that lightings can illuminate your room according to the size and décor of your room.

Benefits:

• Complement any room
• Improve home decorate
• Provide bright flicker-free lighting
• Durable and easy to handle
• Safe and elegant

If you want to take a break from the flickering tube lights and savour the constant stream of bright light, use LED bulbs from a leading LED lighting expert such as “Saving Light Bulbs”. For extraordinary comfort, use can also go for minimalistic in design and charming light bulbs that are designed to illuminate your room in an elegant way. One of the most significant elements is that these LED light bulbs come with warranty.