How to become more Energy Efficient at Home

 

How to become more Energy Efficient at Home

The popularity of building bigger homes also indicates that homeowners must install more lighting fixtures which can escalate the electricity consumption. However, over the last few years energy saving, efficient lighting solutions can assist you to become more energy efficient at home.

Since childhood, individuals were told to turn out the lights when leaving a room. At this moment in time, there are some solutions available on the market that can reduce your electricity bill and make your home save energy.

Energy-efficient lighting solutions have gained itself an impeccable reputation to light up housed more effectively and affordable the last couple of years. The market has seen a transformation where standard bulbs and lighting solutions are now being replaced with LEDs that include products such as 4 pin energy saving light bulbs, LED ceiling lights, LED downlights, and smart lighting products like dimmer switches and controls.

These products are designed to stay on and uses much less electricity than the standard lighting products that were on the market a few decades ago.

Homeowners have become more conscious of the influence they have on the planet than in previous decades. But, then again, they also have some alternative solutions that can not only reduce their energy consumption and bills but decrease their carbon footprint in the environment.

Reducing your electricity bill can be done by implanting small changes over time. Below you will discover some factors to consider.

The normal household in the United Kingdom dedicates five per cent of its electricity to lighting solutions. To reduce this figure, residents can just form a habit of turning the lights off when leaving a room. Incandescent lights and Halogen light bulbs consume the same amount of electricity and should rather be turned off whenever the occupants leave the room for extended periods of time.

At a glance, compact fluorescent lamps (CFLs) might look like a great investment since they are more affordable to purchase. However, LED lighting solutions such as downlights for the living room, LED strips for underneath the kitchen cabinets, and exchanging your lamp lights with 4 pin energy saving light bulbs are more ideal for your home. Even though they are more expensive than CFLs they have a longer life span and consume less energy, making the ideal lighting solutions, despite their added cost.

The development and design of light bulbs have improved a lot in recent years. Here are some facets to think about when picking the proper lighting solution for your home.

It is important to pick out a light bulb with the proper fitting and since they come in different sizes. For instance, the Compact Fluorescent Lamp light bulb comes in different designs such as the 4 pin and 2 pins. You want to make sure you pick the correct one, so you do not have to go back to the store or waste money on additional lighting fittings.

It is worth noting that 4 pin energy saving light bulbs come in different designs. Find the right colour, brightness and shape for your lighting fittings that suit the aesthetic appeal of the area you going to use it for.

Energy efficient lighting is considered as both LED light bulbs and CFL, which can make it difficult to pick between the two. However, they both reduce electricity consumption. Then again, electricity use fluctuates from property to property, but it is always best to switch your standard lighting products to energy-efficient products since it will reduce your carbon footprint and cut back on energy expenses.

About Us

Saving Light Bulbs is a well-respected family-owned company based in the United Kingdom that specialises in LED lighting and energy-efficient solutions. We are passionate about helping domestic, commercial, public as well as social enterprises to reduce their carbon footprint by providing energy-efficient lighting services and products. With more than 1000 products catalogued on our online platform, we stock only the most reliable and highest quality products and can support you whatever you budget. If you want to reduce your energy consumption, upgrading your lighting and intergrading smart solutions, our highly dynamic team is dedicated and friendly to assist you with your requests. For more information visit http://www.saving-light-bulbs.co.uk

Reasons Drivers are Important For LED Lighting

 Reasons Drivers are Important For LED Lighting 

A lot of property owners are now switching over to energy-efficient lighting solutions to lower their power consumption and reduce their carbon footprint.

You might have considered to change your standard lighting to LED lighting and returned from the hardware store with a trunk of LED strig lights and a big dream, but you are not sure how this lighting works and how to turn them on.

LED lights are a good choice for business and home settings, however, the key to accomplishing the ideal light-balance in your environment is by using the correct power supply.

At this moment, there are 2 domineering power supplies available when installing LED lighting in your setting namely electronic transformers and 24v LEDdrivers. In this article, you will obtain information regarding 24v LED drivers.

Installing LED lights, you will need a unique device called a 24v LED driver to operate and turn on your lights. LED drivers act in a similar way to what a ballast achieves for fluorescent lighting. The LED drivers administer line voltage into power fit to operate a LED. Furthermore, since the electrical properties of LED alter due to temperature changes, the driver maintains and regulates a constant 24 volts.

LED drivers have three major functions. The majority of residential properties consume 120-277V AC electricity, however, LED work on low voltage DC electricity. Therefore, the driver switches the higher voltage ACC into a lower voltage DC current to equal the 24v what LED lighting requires to operate correctly.

It is worth noting that the voltage to the driver must be similar to the voltage needed by the driver. If this is not the case, the voltage difference can cause flashing or flickering.

A general tactic for regulating light productivity is pulse-width modulation. If you dim your LED bulbs, specifically at the lower end of light output, it may result in it flickering.

The majority of LED lighting need a 24v driver, a small number of them are designed to operate on AC current. Even though the LED bulbs you purchase on the market may not look like they have drivers, that feature with an internal driver.

When doing kitchen improvements and installing LED strips, you will require a driver to operate the lighting. These 24v drivers can be purchased separately and one driver can deliver electricity to more than one LED strip.

For those property owners that already have LED lights, if you discover that your LED lighting is getting dim, it is most likely that the driver is faulty and not your LEDs.

LED drivers run at high internal temperature and can reduce the lifespan of the LED bulb when used in a hot garage or enclosed fixture.

The driver may not function optimally and can stop working before the LED seize up.

LED lighting operates much better in cold temperatures CFLs since they are faster than incandescent, whilst CFL bulbs may need a dim light, warm-up before reaching full output potential.

For those individuals that have just purchase a handful of LED strips to install in their kitchen, it is best to buy a driver for your lighting renovation.

In the past, LED lighting products were very expensive to purchase. However energy-efficient lighting solutions such as LED bulbs, 24v drivers, dimmer switches, and more are becoming more affordable for consumers. Reducing your power consumption and lighting up a room can be accomplished when you purchase the proper lighting products and installing them correctly. If you need help to choose the correct LED lighting solution for your kitchen or bathroom area, ask the help of a lighting and energy-efficient solution specialist to assist you and give you informed advice.

About Us

Saving Light Bulbs is a well-respected family-owned company based in the United Kingdom that specialises in LED lighting and energy-efficient solutions. We are passionate about helping domestic, commercial, public as well as social enterprises to reduce their carbon footprint by providing energy-efficient lighting services and products. With more than 1000 products catalogued on our online platform, we stock only the most reliable and highest quality products and can support you whatever you budget. If you want to reduce your energy consumption, upgrading your lighting and intergrading smart solutions, our highly dynamic team is dedicated and friendly to assist you with your requests. For more information visit http://www.saving-light-bulbs.co.uk